Question 1

It is worth seeing how silicone manufacturers handle product quality issues.

Accepted Answer

Many customers will encounter problems with customized products. How to solve them? First, figure out if it's the supplier's mess-up or your order getting screwed.If it's the supplier's problem: 1. Snap some pics or videos to show what's wrong with the product. 2. Hit up the person in charge, tell him the issue, and sort out a fix. 3. Get him to comp you or remake it and ship it out.If it's the Client's problem:1.Place a new order and tell the supplier to produce and manufacture as soon as possible.2.For safe production, confirm all product information with suppliers before mass production. The most important thing is to check the information. And confirm whether the product is qualified at the sample stage.If you still don’t know how to do it, please tell the supplier to make it according to the sample. As a professional silicone product manufacturer, FromRubber is committed to solving detail problems for customers and reducing risks in the customization process.If you are customizing products, you may wish to contact us to listen to expert advice (free of charge for consultation) hah.Thank you for reading

Question 2

What is the tolerance range of rubber moulded products!

Accepted Answer

Tolerances for moulded rubber products As shown in the figure on the right, the tolerances of rubber products are in class M1/C. Usually silicone rubber products factory is to use this standard to determine whether the product meets the requirements. And this is also the international uniform standard.

Question 3

Uncovering the source of the unpleasant smell of silicone rubber products.

Accepted Answer

Some silicone products have an unpleasant odor because manufacturers may use low-quality, inexpensive curing agents to cut costs. These curing agents, which are chemicals that help silicone materials harden, can release volatile organic compounds (VOCs) that cause the smell. Unlike our environmentally friendly curing agents that pass rigorous ROHS testing, these lower-quality options can leave behind residual odors. At fromrubber, we believe that customer satisfaction is our ultimate measure of success.

Question 4

Prototype molds are used in the early stages of project development to reduce risks through testing.

Accepted Answer

The Importance of Prototype Mold Manufacturing In the product development process, prototype mold manufacturing is a method used to quickly create initial molds for design validation, functionality testing, or small-batch trial production. These molds are usually simpler and more cost-effective than final production molds but still provide a good representation of the product’s design and functionality. Purpose of Prototype Mold Manufacturing Design Validation Prototype molds allow the design team to evaluate the product’s appearance, dimensions, and structure in the early stages, ensuring they meet expectations. Functionality Testing Small batches of products can be produced using prototype molds for performance testing, ensuring the product functions correctly under real-world conditions. Market Feedback Prototype molds can be used to create early product samples for presentation to customers or the market, gathering feedback to refine the design. Production Process Optimization Testing with prototype molds helps identify potential issues in the manufacturing process, allowing for improvements to streamline mass production later. Characteristics of Prototype Molds Lower Cost Prototype molds are generally less expensive to manufacture compared to final production molds, as they often use more affordable materials like aluminum, resin, or other easily processed materials instead of costly steel. Short Production Cycle The creation of prototype molds is relatively quick, making them ideal for rapid iteration and adjustments during the early stages of product development. Short Lifespan Prototype molds are less durable, making them suitable for small batch production or short-term testing, but they cannot withstand long-term, high-volume production. Before starting your project, please reach out to us to discuss how to create high-quality prototype molds. With our expert services, you can significantly enhance the success rate of your product development and ensure that your product better meets market demands.For more information,consult us now!

Question 5

rubber manufacture show you the conductive methods with silicone rubber keypads.

Accepted Answer

Conductive Methods Conductive pills ●Resistance value：10^-2 Ω·cm●Conventional shape：Round, torus●Applications：Flexible electronics, coatings Conductive ink ●Resistance value：10^-3 to 1 Ω·cm●Conventional shape：Arbitrary shape●Applications：RFID antennas, printed circuits Metal pills ●Resistance value：2.44 × 10^-8 Ω·m●Conventional shape：Round, torus●Applications：Chip packaging, aerospace devices

Question 6

The significance of making prototype mold

Accepted Answer

The function played by prototype molds The customization of silicone rubber products is divided into two major steps.1.Make the prototype mold.2.Make the Production mold. The significance of making prototype molds is considered from the following points.1.Detection of possible problems from design to sample.2. Test the parts to see if they meet the requirements before mass production.3.Low cost of adjusting prototype molds.4.Prototype molds can help customers test the difference between samples of different colors and different hardnesses.5.The best solution for testing product colors....Overall, prototype molds can help customers avoid more risks, adjust and make the most suitable samples.

Question 7

Rubber patch suppliers show you the process of rubber patches production.

Accepted Answer

How to make rubber logo patch? To make a rubber patch, first you need to prepare the design of the corresponding product.1.Ai format design2.High Definition PDF design.Here's how the rubber log patches are made, and you can tell how many steps there are.●Step1: make the Production mold for rubber patches.●Step2: rubber raw material color mixing.●Step3:Vacuuming to remove air from raw materials.●Step4:Through the program and piping, rubber drops of different colors are dropped to the corresponding positions in the mold.●Step5:Remove excess burrs.●Step6:A one-of-a-kind rubber patch is born. It serves only you.View video information,learn more

Question 8

Show you the cost and delivery time of rubber patch molds on the market!!

Accepted Answer

How Much Are The Molds For Custom Rubber Patches? The molds used to make rubber patches are usually very small.The size of the mold is usually 200mm*200mm.The main material is made of copper or aluminum.For example, size:50mm*80mm, 4 color patches.Proofs usually cost $100 and include 3 samples.The cost of the production mold (for example, aluminum) is usually composed of two parts1. Front mold (the front side of the product with many colors) The price is usually 80USD.2. Bottom mold (the base of the product) The price is usually 40USDUsually the price is related to the number of product sizes and colors.If you happen to have rubber patches that needs to be evaluated, why not contact us by clicking on the top right corner to get a quick quote!

Question 9

compare the prototype mold with production mold

Accepted Answer

The difference between prototype mold and production mold? ●Prototype Mold：small mould size：150*150mm .   1 cav.  usually to produce samples for test Product feasibility. ●Production Mold:  large mould size:  350*350 mm.  15-50cav.  For mass-produced products

Question 10

Lead time for Silicone parts & Plastic parts

Accepted Answer

1,The lead time for silicone rubber parts prototye samples is 3~15days, according to the different parts2, The lead time for Plastic parts prototye smaples, For 3D printing, it will take roughly 1~3days, For injection samples, it will take roughly 15~30days

Question 11

How to custom a new silicone Keypads or a new silicone Product?

Accepted Answer

In general, there are several steps:1, Customer send design drawing or actual sample to manufacture ,the drawing can be .STP or .IGS file.2, Manufacture will make a prototype mold and sample first3,After the samples approve,Manufacturer start the production mold and next production

Custom Solutions in Silicone Rubber and Plastic Manufacturing

FAQs

Are you looking for a rubber and plastic product customization solutions manufacturer?

Sign Up Out Newletter

Customization

Solutions

Support

About us

Contact Us