Silicone Product Technology
Small Silicone Logo Design on Clothing: How to Keep Thin Lines Visible?Oct 9,2026Thin lines in a small moulded silicone logo disappear for geometry reasons, not printing reasons. This article explains which features fail first, how to adjust artwork before tooling, how material and surface finish change what the eye can see, and what to check on a sample at final size.- How Small Can a Small Silicone Logo Be on Clothing?Oct 9,2026There is no single minimum size for a silicone logo on clothing. The practical limit is set by the smallest feature in the artwork. This article covers what determines that limit, how artwork should change as the logo shrinks, and how to find and validate the smallest feasible size.
- Why Does a Silicone Heat Transfer Label Fail on Stretch Fabric?Oct 9,2026Edge lifting, cracking and post-wash detachment on stretch fabric are different faults with different causes. This article explains how elastic recovery loads the bond line, how to identify the failure interface, and how to reduce risk before bulk production.
- How Does Fabric Type Affect Small Silicone Patch Adhesion?Oct 9,2026A small silicone patch that works on one garment fabric may lift or detach on another. This article separates the fabric properties that matter, explains why patch geometry changes the adhesion question, and sets out a compatibility assessment workflow.
- Silicone Heat Transfer Label on Polyester: What Causes Peeling?Oct 9,2026Peeling is a symptom, not a diagnosis. This article explains what the peeling pattern tells you, the causes that actually apply to polyester, how to separate fabric, label and process factors, and how to prevent peeling before bulk production.
- Adhesive Backing for Silicone Gaskets: How to Choose the Right Tape (and Why Yours Keeps Peeling)Sep 11,2026Silicone gaskets are rated to 200 C, but the backing tape behind them often is not. This guide compares 3M 9448A, 467MP and 9472LE by substrate, thickness and temperature, explains why untreated silicone will not hold an adhesive, and shows how primer application decides whether the bond survives.
- The Hidden Cost of a Perfect Silicone Case Why Every Bubble, Short Edge, and Burn Spot Is a Lawsuit Waiting to HappenAug 6,2026Silicone case defects (bubbles, short edges, scorch marks) stem from poor venting. Discover procurement checklists and expert solutions to protect your brand.
- The Hidden Trap of Silicone Case Hardness Why Too Hard and Too Soft Can Break Your Case (and Your Brand)Aug 6,2026Avoid 80 Shore A cracks & 20 Shore A sagging. Discover the 45±5 Shore A sweet spot for grip, feel & durability. Custom silicone case expert guide by FromRubber.
- Silicone Case Surface Texture Trap Why "Smooth" and "Rough" Are Both Wrong — and How Micro‑Texture WinsAug 6,2026Avoid fingerprint magnets & polished wear. Discover silicone case surface texture selection (EDM, micro-texture) for grip & durability. Expert guide.
- The Silent Killer of Silicone Case Durability — Why Uneven Walls Lead to Stress Whitening, Cracking, and 6% Return RatesAug 6,2026Prevent stress whitening & cracks in silicone case. Master wall uniformity, core-out, and 3D analysis for lasting durability.
- Silicone Product Mold Maintenance & Care: 5 Key Actions to Extend Tool LifeAug 5,2026Regular maintenance—cleaning parting lines, lubricating pins, and rust protection—can triple silicone product mold life. FromRubber provides customized care plans to minimize downtime.
- Custom Silicone Sample vs Mass Production Inconsistent? How to Control Process Stability from Trial to ProductionAug 5,2026Lock process parameters (cure temp/time/pressure), retain gold samples, and perform first-article inspection to ensure production matches custom silicone sample. FromRubber ensures batch-to-batch consistency.
Are you looking for a rubber and plastic product customization solutions manufacturer?
We can quickly provide customers with market analysis, technical support and customized services.Sign Up Out Newletter
Contact Person
