Customized 3d Silicone Pendants For Anime Peripherals And Character Images
| Share | |
|---|---|
| Categories | Custom Multi Color Silicone Case |
| Brand | FromRubber Silicone & Plastic OEM Manufacturer |
| Product Specifications | 3D silicone Pendants |
| Product name | Silicone Nezha figure |
| Material | Silicone |
| Color | Black/red/white/yellow |
| Application | Decorations |
| Hardness | 30-80H |
| Packing | Oppbag |
| Size | Custom |
| FOB port | Shenzhen |
| Terms of Payment | L/C, D/A, D/P, Western Union |
| Download |  |
Custom Silicone Parts / Character Merchandise
Customized 3D Silicone Pendants for Anime Merchandise: Colour, Detail and Licensing
A customized 3D silicone pendant is a small, multi-colour molded object that has to read as the character at arm's length, survive a keyring, and cost little enough to sell as merchandise. Those three requirements fight each other, and the tool decides which one wins.
Colour is where most projects go wrong: paint looks right for a month, and moulded colour costs a cavity per colour. This page sets out the detail, colour and hardware limits before the artwork is committed.
- 30-80 mm
- 0.3-0.5 mm detail
- 2-4 moulded colours
- Phthalate-free grades
How a Customized 3D Silicone Pendant Is Made
Four stages from character art to a part that survives a bag.
- 01
Sculpt, then tool
The 3D model is built to moulding rules: draft on every face, radiused edges, no zero-thickness detail. A model that only works as a render becomes a tool that cannot release.
- 02
Cavity per colour
Each moulded colour needs its own cavity or shot, so the colour count is the tool cost. Two to four colours covers most merchandise; more usually means assembly or a printed base.
- 03
Detail at the mould's limit
Raised and recessed features survive down to roughly 0.3-0.5 mm. Below that the compound fills the detail and the character loses the expression that made it recognisable.
- 04
Hardware in the same tool
The loop is moulded with the figure, with a section thick enough to carry the keyring load. A separate glued loop is the first thing to fail.
Silicone Anime Peripherals: Detail, Size and Colour Window
| Parameter | Typical design window | Why it matters |
|---|---|---|
| Overall size | 30-80 mm tall for keyring merchandise | Detail readability against weight in a pocket |
| Minimum feature | 0.3-0.5 mm raised or recessed | Smaller detail fills in and disappears |
| Moulded colours | 2-4 without paint or assembly | Each colour adds a cavity or a shot |
| Body thickness | 3-6 mm solid | Thin sections warp and lose the silhouette |
| Loop section | At least 2 mm, radiused, load-bearing | The loop is where every charm breaks |
| Material | Phthalate-free compound to the buyer's market requirement | Compliance depends on the destination market |
Windows reflect what moulds reliably. Artwork is checked against them before quotation, because a figure that needs thinner detail needs a bigger charm, not a better mould.
Silicone Character Images: Paint, Colour and Licensing
Three decisions that determine whether the merchandise is sellable.
- 01
Paint versus moulded colour
Paint gives unlimited colour on one cavity but wears at contact points and fails a rub test. For handled merchandise, moulded colour is the durable answer and the tool cost is the price of it.
- 02
Colour separation strategy
Where the budget allows two cavities, split the figure into a base part and an overmolded colour part. Where it does not, use a printed base with moulded highlights on the areas that get touched.
- 03
Hardware and pull strength
Keyring, ball chain or strap each load the loop differently. The loop is specified with the hardware rather than after it.
- 04
Licensing sits with the buyer
Reproducing a character requires the rights to that character. We mould to the artwork you are licensed to use and do not verify ownership, so the clearance belongs in your legal review, not in the toolroom.
Where the same multi-colour moulding is applied to flat labels rather than figures, see personalized heat transfer silicone labels.
Hardware, Safety and Batch Control for 3D Silicone Pendants
A pendant is a small part with a long list of requirements: colour accuracy against the character sheet, edge quality where the figure is handled, loop strength, and a material that satisfies the safety list for the market it sells into.
We mold under IATF 16949 and ISO 9001 quality systems with ISO 14001 environmental management. Batches are checked for colour against the approved master, loop section and surface defects, and colour masters are retained with the tool so a repeat order matches the first run.
From Character Art to Serial Customized 3D Silicone Pendants
Four steps. Artwork that ignores moulding rules costs a tool to discover.
Send the artwork and the market
3D model or character sheet, size, colour count, hardware and the safety requirement for the destination market.
Mouldability review
We check draft, feature size, undercuts and colour split, and return the changes that make the figure mouldable.
Prototype and colour check
Samples in the intended compounds, compared with the character sheet under agreed lighting.
Production with colour masters
Multi-cavity or multi-part tool, colour masters retained, batch checks on colour, loop and edges.
Customized 3D Silicone Pendants FAQ
Questions from merchandise buyers and brand owners.
Can you reproduce our character exactly?
We can reproduce the model you supply, within moulding limits: 0.3-0.5 mm detail, draft on vertical faces and no zero-thickness elements. Where the art exceeds those limits we say so before tooling.
Do you check whether we have the licence?
No. Rights clearance is the buyer's responsibility; we mould to the artwork you are authorised to use. That keeps the toolroom out of a legal question it cannot answer.
How many colours can be moulded without paint?
Two to four is the practical range for a charm at this size. Beyond that, the cost is extra cavities or assembly, and a printed base is often the better commercial answer.
What size should a keyring charm be?
30-80 mm tall covers most merchandise. Bigger reads better but weighs more in a pocket; smaller saves material but loses the expression that sells the character.
Send the artwork and the colour count
Tell us the size, the number of moulded colours and the hardware. We will return a mouldability note and a colour plan before any tool is cut.
- 加载中···
Start Your Project Today!
- Phone
- *Title
- *Content
Sign Up Out Newletter
