FromRubber Free Custom Consultation for Cartoon 3D Silicone Kid's Camera Case

Designed for the design and production with complex patterns, rich colors, safe and reliable silicone products

A silicone kid's camera case is bought for one reason: the camera will be dropped. So the shell is designed around the places a small camera actually lands on - the corner beside the lens, the edge under the strap lug and the back face where the screen sits - rather than around the character outline alone.

The mould carries the character and the protection at the same time. Corners are thickened, the lens opening is cut as a clean ring so nothing overlaps the glass, and the button and port openings are positioned from the camera drawing rather than from the artwork. Deep undercuts at the ears or the tail are what give the cover its three-dimensional read, and each colour is either shot separately or printed, with a matte finish on the raised parts so the shape stays visible at arm's length.

Silicone earns its place here because it absorbs a knock instead of passing it on, it grips a smooth table edge, it does not crack at the corner the way a rigid plastic shell does, and it can be washed after a day outdoors. It also stays flexible in a cold car and does not harden in a hot one, which is where a cheap TPE cover shows its limits.

For a custom cartoon 3D silicone kid's camera case, send the camera model or its drawing with the lens centre, strap lug and button positions marked, plus the artwork or a sketch of the character, the colour count, and whether the case must fit with a strap attached. We will come back with a mould split, an opening plan and a sample date.

Mould, compound, colour and print run under one roof, so a change to the lens ring or to one of the character's ears does not become a hand-off between suppliers.