Silicone Product Technology
- 5 Key Factors to Consider When Choosing an Industrial Plastic EnclosureAug 4,2025The five factors that decide an industrial plastic enclosure: ingress protection and its weak points, material and UV, flame requirements, thermal behaviour in a sealed box, and serviceability, with the failure each one prevents.
- Clear vs. Opaque Plastic Enclosures: Which One Fits Your ProjectAug 4,2025Clear versus opaque plastic enclosures compared on material choice, UV stability, internal cosmetics, flame rating and cost, plus when a window in an opaque body is the better engineering answer.
- Silicone Thin-Film Switch vs. Traditional PCB: A Flexibility ComparisonJul 28,2025Silicone thin-film switch versus a traditional PCB compared on fatigue rather than strength: bend radius, conductor resistance, connector strategy, cost at low volume, and the design rules that stop a flexible switch failing in the field.
- Customizing Silicone Membrane Switches: Options for Backlighting, Printing & LayoutJul 28,2025The customization options on silicone membrane switches: overlay printing, backlight constructions and what each costs, tactile elements, shielding and tail design, plus the layer-stack drawing to request before a quotation.
- How to Integrate LED Backlighting into Silicone Control Panels?Jul 23,2025Learn to integrate LED backlighting into silicone control panels: design tips, material selection, assembly steps, and solutions for common challenges to enhance visibility and durability.
- Why Choose Flexible Silicone Keypads for Industrial Equipment?Jul 23,2025What flexible silicone keypads actually buy on industrial equipment: an integrated seal, conformance to curved housings, tolerance absorption and vibration damping, plus the three cases where flexibility becomes a liability.
- Stick It & Forget It: The Suction Cup Silicone Tissue Holder for Your BathroomJul 11,2025Why suction-mounted holders fail and how to design against it, the fixing methods compared for a wet room, load and humidity effects on a custom silicone tissue holder, and what to specify for private label.
- Rubber Overmolding: A Smarter Way to Unite Plastic & MetalJul 3,2025How rubber overmolding bonds by chemical adhesion or mechanical interlock, which mechanism suits which substrate, two-shot versus insert moulding, substrate preparation, and how to read a delamination failure.
- How to Design Custom Conductive Silicone ButtonsJun 18,2025A practical design sequence for a conductive silicone button: contact geometry against the PCB pad, carbon pill height, force and travel, legend options, tooling notes and the checks to run before mould steel is cut.
- Benefits of Custom Silicone Keypad ManufacturingJun 16,2025Where custom silicone keypad manufacturing actually saves money: tooling amortisation, assembly steps removed, scrap and change orders, plus the design features that only exist once a tool is dedicated to your layout.
- Silicone Molding for Consumer ProductsJun 13,2025Discover how silicone molding enhances consumer products like kitchenware and baby toys. Learn why FromRubber is your trusted partner for custom silicone solutions.
- What's The Over-Molded?May 19,2025What over-molding is, how it differs from insert molding, how the bond forms between silicone and a substrate, the design rules that keep it attached, and the cases where it is the wrong process.
Are you looking for a rubber and plastic product customization solutions manufacturer?
We can quickly provide customers with market analysis, technical support and customized services.Sign Up Out Newletter
Contact Person















